Carter Slade Ghost Rider Cosplay Helmet

from $75.00
*PLEASE NOTE: On international orders we will be unable to provide power banks. The link to the one used is below!*
https://www.amazon.com/gp/product/B09WMHBC77/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Become the classic cowboy Spirit of Vengeance with this fully animated 3D-printed mask. It is assembled with an actual cowboy hat. The LEDs run off of a rechargeable 20,000 mAh power bank to ensure a full event’s wear! The mask is held together on the user’s head via neodymium magnets in the fire and skull portion.

These are made to order - Please allow 3-5 weeks processing time!

PLEASE READ THE DESCRIPTIONS BELOW TO SEE WHAT EACH FINISH OPTION INCLUDES!

1- Finished Helmet PLA+ $900 (website price): This includes a skull portion printed and finished in PLA+. It is meticulously sanded and painted by hand and the jaw is fitted with elastic to open and close with the wearer’s jaw. Black mesh is installed in the eye sockets. The fire portion is fully sealed with LEDs, diffusion, and magnets installed.

2- Unfinished PLA+ + Finished Fire $675 (website price): This option features an UNPAINTED skull printed in PLA+. Elastic and eye mesh are included but NOT INSTALLED for ease of sanding and painting the skull and jaw yourself. The fire portion is fully sealed with LEDs, diffusion, and magnets installed.

3- Unfinished PLA+ Skull + Unfinished Fire $375 (website price): Please note that the unfinished fire kits can be difficult for beginner builders. This option features an UNPAINTED skull printed in PLA+. Elastic and eye mesh are included but NOT INSTALLED for ease of sanding and painting the skull and jaw yourself. The fire portion REQUIRES ASSEMBLY via plastic fusing the pieces together. Cotton sheeting is included for diffusion. A pre-programmed 5V Adafruit Trinket Pro is included with LEDs pre-wired to the board. The LEDs are not installed in the fire portion and will have to be glued in via the included LED cradles.

4- Skull Mask ONLY, PLA+ painted $175: This is the half mask shown in the listing, printed in PLA+, painted, and strapped for wearing. Eye mesh is included and attached to the mask.

5- Skull Mask ONLY, PLA+ raw print $75: This is the half mask shown in the listing, printed in PLA+, raw and unpainted. Eye mesh is included to glue into the mask after finishing and painting, as well as strapping material.

6- LED lighting kit $85: Prewired Adafruit ItsyBitsy and LED strips for anyone who wants the fire animation in their own builds, but doesn't want to mess with electronics!

7- Skull Mask and Fire portion NO LEDS, PLA+ raw print $100: This is an unpainted version of the mask that has no leds inside of the fire portion. The fire will be printed in a transparent orange filament!

8- Skull Mask and Fire portion NO LEDS, PLA+ PAINTED $200: This version of the mask has a painted skull but no leds inside of the fire portion. The fire will be printed in a transparent orange filament!
Size:
Finish (See Description):
*PLEASE NOTE: On international orders we will be unable to provide power banks. The link to the one used is below!*
https://www.amazon.com/gp/product/B09WMHBC77/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Become the classic cowboy Spirit of Vengeance with this fully animated 3D-printed mask. It is assembled with an actual cowboy hat. The LEDs run off of a rechargeable 20,000 mAh power bank to ensure a full event’s wear! The mask is held together on the user’s head via neodymium magnets in the fire and skull portion.

These are made to order - Please allow 3-5 weeks processing time!

PLEASE READ THE DESCRIPTIONS BELOW TO SEE WHAT EACH FINISH OPTION INCLUDES!

1- Finished Helmet PLA+ $900 (website price): This includes a skull portion printed and finished in PLA+. It is meticulously sanded and painted by hand and the jaw is fitted with elastic to open and close with the wearer’s jaw. Black mesh is installed in the eye sockets. The fire portion is fully sealed with LEDs, diffusion, and magnets installed.

2- Unfinished PLA+ + Finished Fire $675 (website price): This option features an UNPAINTED skull printed in PLA+. Elastic and eye mesh are included but NOT INSTALLED for ease of sanding and painting the skull and jaw yourself. The fire portion is fully sealed with LEDs, diffusion, and magnets installed.

3- Unfinished PLA+ Skull + Unfinished Fire $375 (website price): Please note that the unfinished fire kits can be difficult for beginner builders. This option features an UNPAINTED skull printed in PLA+. Elastic and eye mesh are included but NOT INSTALLED for ease of sanding and painting the skull and jaw yourself. The fire portion REQUIRES ASSEMBLY via plastic fusing the pieces together. Cotton sheeting is included for diffusion. A pre-programmed 5V Adafruit Trinket Pro is included with LEDs pre-wired to the board. The LEDs are not installed in the fire portion and will have to be glued in via the included LED cradles.

4- Skull Mask ONLY, PLA+ painted $175: This is the half mask shown in the listing, printed in PLA+, painted, and strapped for wearing. Eye mesh is included and attached to the mask.

5- Skull Mask ONLY, PLA+ raw print $75: This is the half mask shown in the listing, printed in PLA+, raw and unpainted. Eye mesh is included to glue into the mask after finishing and painting, as well as strapping material.

6- LED lighting kit $85: Prewired Adafruit ItsyBitsy and LED strips for anyone who wants the fire animation in their own builds, but doesn't want to mess with electronics!

7- Skull Mask and Fire portion NO LEDS, PLA+ raw print $100: This is an unpainted version of the mask that has no leds inside of the fire portion. The fire will be printed in a transparent orange filament!

8- Skull Mask and Fire portion NO LEDS, PLA+ PAINTED $200: This version of the mask has a painted skull but no leds inside of the fire portion. The fire will be printed in a transparent orange filament!